Specifications

5-27
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 5 Configuring Services
Configuring Programs
Defining a Program
To define a live or rebroadcast program, do the following:
Step 1 Choose Services > Live Video > Live Programs. The Program Table page is displayed.
Step 2 Click the Create New icon in the task bar. The Program Definition page is displayed.
To edit an existing program, click the Edit icon next to the program name.
Step 3 In the Name field, enter a unique name for the program.
Step 4 From the Type drop-down list, choose a program type.
Step 5 Check the Auto Deletion check box if you want the program to be automatically deleted 24 hours after
it has finished. This option only applies to live programs.
Note The Auto Deletion check box is not supported in Release 2.1 and subsequent releases.
Step 6 In the Description field, enter information about the program.
Step 7 Click Submit to save the settings.
You have defined the type of program that you want to configure. Proceed to the section for configuring
that type of program:
• To configure Movie Streamer live and Windows Media live programs, see the next section,
“Configuring Live Programs.”
• To configure Windows Media rebroadcast and Movie Streamer rebroadcast programs, see the
“Configuring a Rebroadcast” section on page 5-34.
For information about copying a program, see the “Copying a Program” section on page 5-41.
Configuring Live Programs
Once you have defined the program type, you must select a live delivery service, configure the streaming,
and create a schedule. This procedure takes you through these steps and assumes you have already
defined the program (see the “Defining a Program” section on page 5-27).
To configure a Movie Streamer live or Windows Media live program, do the following:
Step 1 After you have chosen a program from the Program Table page, click Select Live Delivery Service. The
Select Live Delivery Service page is displayed listing all the live delivery services configured.
Step 2 Click the radio button next to the name of the live delivery service you want to associate with the
program and click Submit. Alternatively, click the Create New Live Delivery Service icon in the task
bar.
If you are creating a new live delivery service, the New Live Delivery Service page is displayed.
a. The Name field is automatically populated with a unique delivery service name. If you wish to
change the name given by default, enter a unique name for the delivery service in this field.
b. From the Content Origin drop-down list, choose a Content Origin.