Specifications

5-13
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 5 Configuring Services
Configuring Delivery Services
Figure 5-8 Content Manager Page
To edit a content item, click the Edit icon next to the content. For more information about manipulating
the content items in the Content Table page, see the “Configuring Proxy Server Settings” section on
page 5-21.
Step 3 Choose a protocol from the Source URL drop-down list, and enter the source URL in the associated
field.
The source URL is the origin server domain name or IP address, followed by a path, or path and filename,
if applicable.
Note The URL format for Server Message Block (SMB) servers is: \\SMB
server:port\sharedfolder\filepath. If port is not specified in the URL, the default port, 139, is
used. Maximum file size, when using SMB for acquisition, is 2 GB. Symbolic links within
exported file systems (SMB or NFS) must contain a relative path to the target file, or the target
file should be copied into the exported volume.
Step 4 Do one of the following:
a. To identify a single content item, check the Single Item check box, and go to the “Configuring
Advanced Settings” section on page 5-17 in this procedure.
b. To define a crawl, uncheck the Single Item check box, and in the Link Depth field, enter the depth
of the links to search. Go to the “Defining a Crawl Task” section on page 5-14 in this procedure.
c. To perform a quick crawl, uncheck the Single Item check box, and, in the Link Depth field, enter
the depth of the links to search. Go to the “Launching Quick Crawl” section on page 5-16 in this
procedure.