Specifications

5-9
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 5 Configuring Services
Configuring Delivery Services
Step 11 Click Submit to save the settings.
General Settings
Step 12 From the left-panel menu, click General Settings. The General Settings page is displayed.
Step 13 In the Maximum Bitrate Limit per Session for HTTP field, enter the maximum rate, in Kbps, at which
a client can receive content.
This bit rate applies to content that is stored locally, specifically, prefetched, hybrid, or cached. For a
cache miss, content is delivered at the rate the origin server sends it.
Step 14 In the Maximum Bitrate Limit per Session for HTTP Cache Miss field, enter the maximum rate, in
Kbps, at which a client can receive content that was a cache miss.
This bit rate applies to content that is not stored locally, specifically, content requiring dynamic caching
from the origin server or another SE in the delivery service that has the content.
Note This is a Release 2.1 feature.
Step 15 In the Disable HTTP Download field, check the check box to not allow clients to download HTTP
content through this delivery service.
WMT Streaming When checked, an HTTP callout to the policy server is done for each stream
request.
Progressive
Download
When checked, an HTTP callout to the policy server is done for each download
request.
Authorize URLs
with following
extensions
All URLs with file extensions that match those checked, or specified in the Others
field (comma-separated), are authorized using ICAP.
Authorize URLs
with no extensions
When checked, all URLs with no file extensions are authorized using ICAP.
Error Redirect
URL
If the URL authorization fails, the request is redirected to the error URL specified
in the field.
Validation All URLs with file extensions that match those checked, or specified in the Others
field (comma-separated), are validated in the SE.
Validation URLs
with no extension
When checked, all URLs with no file extensions are validated in the SE.
Need not validate When checked, validation is turned off.
Key to be used for
External
Signature
Generation
(Informational
only)
The CDSM displays:
KO=1 KN=1 KEY=yEOCA6C7TWh4NAw9.
where
• KO is the signature key owner.
• KN is the signature key number.
For information about configuring URL key signatures, see the “Configuring URL
Signing” section on page 4-23.
Table 5-3 PCMM Configuration Fields (continued)
Field Description