Specifications

5-7
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 5 Configuring Services
Configuring Delivery Services
Note Use either Assign Service Engines, or Assign Device Groups to assign Service Engines and
select a Content Acquirer.
Step 5 From the left-panel menu, click Assign Service Engines. The Service Engine Assignment page is
displayed (Figure 5-4).
Figure 5-4 Service Engine Assignment Page
Step 6 Click the Assign icon (blue cross mark) next to the SE you want to assign to this delivery service.
Alternatively, in the task bar, click Assign All Service Engines. The SE assignment states are described
in Figure 5-5.
Figure 5-5 SE Assignment State
A green arrow wrapped around the blue cross mark indicates an SE assignment is ready to be submitted.
To unassign an SE, click this icon.
Step 7 From the Assign Content Acquirer drop-down list in the task bar, choose an SE to be the Content
Acquirer for this delivery service.
The list contains all SEs currently assigned to the delivery service.
The Primed check box indicates if an SE is primed with a live stream. For more information about
priming, see the “Priming a Live Delivery Service” section on page 5-34.
Step 8 Click Submit to save the SE and Content Acquirer assignments.
New Assign
Assigned and
waiting for
Submit
Assignment
Submitted
Unassign
Submitted
Assignment
Not modifiable. The quota on
all the delivery services for this
SE exceeds the disk space.