Specifications

5-6
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 5 Configuring Services
Configuring Delivery Services
Step 4 Click Submit to save the settings.
To delete a delivery service, from the Delivery Service Table page, click the Edit icon next to the
delivery service you want to delete, and click the Trash icon in the task bar.
SE and Content Acquirer Assignment or Device Group and Content Acquirer Assignment
Step 5 through Step 8 use the Assign Service Engines option to describe the procedure of assigning the
Service Engines to the delivery service and selecting one of them as the Content Acquirer. If you have
device groups defined, you can use the Assign Device Groups option instead. To assign device groups,
follow Step 5 through Step 8 and substitute Device Groups for each instance of Service Engines or SE.
Acquisition and Distribution Properties
Distribution Priority Content distribution priority setting. Options are High, Normal, and
Low. The default is Normal.
The priority of content acquisition also depends on the origin server.
Requests from different origin servers are processed in parallel.
Requests from the same origin server are processed sequentially by
their overall priority.
Use null cipher for
Distribution
When checked, disables encryption for distribution.
Content Acquirer
failover/fallback grace period
Number of minutes before a Content Acquirer failover or a temporary
Content Acquirer fallback occurs. The range is from 20 to 120 minutes.
For more information, see the “Content Acquirer Redundancy” section
on page 1-27.
Never When checked, SE failover or fallback never occurs.
Use system-wide settings for
QoS for unicast data
When checked, applies the system-wide QoS settings for unicast data
to the delivery service.
To override the system-wide QoS settings with delivery
service-specific QoS values, leave this check box unchecked, and
configure the delivery service-specific QoS values in the QoS value for
unicast data field.
QoS value for unicast data Configures a Differentiated Services Code Point (DSCP) value for the
QoS.
If you choose Other, enter a decimal value in the corresponding field.
You can set QoS settings on a per-delivery service basis and a
system-wide global configuration basis. Delivery service settings take
precedence over global settings.
QoS value for content
delivery
Configures a Differentiated Services Code Point (DSCP) value for the
QoS on a per-delivery service basis.
If you choose Other, enter a decimal value in the corresponding field.
Note This is a Release 2.3 feature and applies only to Windows
Media Stream Streaming and Web engines.
Comments Information about the delivery service.
Table 5-2 Delivery Service Definition Fields (continued)
Field Description