Specifications

4-90
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 4 Configuring Devices
Configuring the Service Router
Step 3 Click Submit to save the settings.
IP-Based Redirection
Note IP-based redirection is a Release 2.3 feature.
IP-based redirection uses IP addresses to route client requests to the SR and on to the SE. For more
information, see the “IP-Based Redirection” section on page 1-20.
To enable IP-based redirection, do the following:
Step 1 Choose Devices > Devices > IP-based Redirection. The IP-based Redirection page is displayed.
Step 2 Check the Enable IP-based Redirection check box and click Submit.
Configuring Application Control
The Application Control pages allow you to enable Flash Media Streaming and to enable HTTP proxy
on an SR.
Note The Application Control pages for the SR are part of Release 2.1.
To configure the application control for the SR, do the following:
Step 1 Choose Devices > Devices. The Devices Table page is displayed.
Step 2 Click the Edit icon next to the SR you want to configure. The Device home page is displayed.
Step 3 Click Show All to display the top-level menu options, and choose Application Control.
Step 4 To enable Flash Media Streaming on the SR, click Flash Media Streaming. The Flash Media Settings
page is displayed.
a. Check the Enable Flash Media Streaming check box.
b. Click Submit.
Step 5 To enable HTTP proxy on the SR, click Web > HTTP > HTTP Connections. The HTTP Connections
Settings page is displayed.
a. Check the Enable Incoming Proxy check box.
b. Enter the port numbers that receive HTTP in the associated field.
Separate each port number by a space. The default is port 80.
c. Click Submit to save the settings.