Specifications

4-87
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 4 Configuring Devices
Configuring the Service Router
The keep-alive interval is used by the SE to send keep-alive messages to the SR.
To configure the keep-alive interval the SE uses for messages to this SR, do the following:
Step 1 Choose Devices > Devices > General Settings > Service Routing Settings. The Service Routing
Settings page is displayed.
Step 2 In the Keepalive-Interval field, enter the number of seconds the messages from the SR should be kept
alive on this SE. The range is from 1 to 120. The default is 2.
Step 3 Click Submit to save the settings.
Configuring the Service Router
Configuring a Service Router (SR) consists of the following procedures:
• Activating a Service Router
• Configuring Routing Settings
• IP-Based Redirection
• Configuring Application Control
• General Settings—Last Resort
For information on configuring all general settings, except Last Resort, see the “General Settings”
section on page 4-48.
Activating a Service Router
Activating an SR can be done through the Device home page initially, or through the Device Activation
page.
To activate an SR from the Device Activation page, do the following:
Step 1 Choose Devices > Devices. The Devices Table page is displayed.
Step 2 Click the Edit icon next to the SR you want to configure. The Device home page is displayed.
Step 3 Click Show All to display the top-level menu options, and choose Device Activation. The Device
Activation page is displayed.
Step 4 Enter the settings as appropriate. See Table 4-46 for a description of the fields.
Table 4-46 Service Router Activation Fields
Field Description
Name Name of the device.
Activate To activate or deactivate the device, check or uncheck the Activate check box.
Location The Location drop-down list lists all the location configured for the CDS.