Specifications

4-84
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 4 Configuring Devices
Configuring the Service Engine
Step 23 Click Submit to save the settings.
Step 24 From the left-panel menu, click Asset Tag. The SNMP Asset Tag page is displayed.
Step 25 In the Asset Tag Name field, enter a name for the asset tag.
Step 26 From the left-panel menu, click Contact. The SNMP Contact page is displayed.
Step 27 In the Contact field, enter a name of the contact person for this SE.
Step 28 In the Location field, enter a location of the contact person for this SE.
Step 29 Click Submit to save the settings.
Supported MIBs
The SNMP agent supports the following MIBs:
• ENTITY-MIB (RFC 2037)
• MIB-II (RFC 1213)
• HOST-RESOURCES-MIB (RFC 2790)
• CISCO-ENTITY-ASSET-MIB
• CISCO-CONFIG-MAN-MIB
• CISCO-SERVICE-ENGINE-MIB (supports streaming media-related MIB objects)
ENTITY-MIB, MIB-II, and HOST-RESOURCES-MIB are public-available MIBs.
The CISCO-SERVICE-ENGINE-MIB is extended to incorporate MIB objects related to streaming. The
WMT and Movie Streamer groups incorporate statistics about the WMT server or proxy, and Movie
Streamer. The Flash Media Streaming group incorporates statistics about the Flash Media Streaming
protocol engine. For each 64-bit counter MIB object, a 32-bit counter MIB object is implemented so that
SNMP clients using SNMPv1 can retrieve data associated with 64-bit counter MIB objects. The MIB
objects of each of these groups are read-only.
• The WMT MIB group provides statistics about WMT proxy and server performance. Twenty-eight
MIB objects are implemented in this group. Six of these MIB objects are implemented as 64-bit
counters.
• The Movie Streamer MIB group provides statistics about RTSP streaming engine performance.
Seven MIB objects are implemented in this group. Two of these MIB objects are implemented as
64-bit counters.
• The Flash Media Streaming MIB group provides statistics about HTTP and RTMP streaming engine
performance.
The CISCO-SERVICE-ENGINE-MIB is available from your Cisco account team.
Use the following link to access the CISCO-ENTITY-ASSET-MIB and the
CISCO-CONFIG-MAN-MIB:
ftp://ftp.cisco.com/pub/mibs/v2/
Retry Number of retries (1 to 10) allowed for the inform request. The default is 2.
Timeout Timeout for the inform request in seconds (1 to 1000). The default is 15.
Table 4-44 SNMP Host Fields (continued)
Field Description