Specifications

4-83
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 4 Configuring Devices
Configuring the Service Engine
Step 15 Click Submit to save the settings.
Step 16 To define a SNMPv2 MIB view, click View from the left-panel menu. The SNMP View Table page is
displayed.
The maximum number of SNMPv2 views that can be created is ten.
Step 17 Click the Create New icon in the task bar. The SNMP View page is displayed.
Click the Edit icon next to the username to edit a view.
Step 18 Enter the settings as appropriate. See Table 4-43 for a description of the fields.
Step 19 Click Submit to save the settings.
Step 20 From the left-panel menu, click Host. The SNMP Host Table page is displayed.
The maximum number of hosts that can be created is four.
Step 21 Click the Create New icon in the task bar. The SNMP Host page is displayed.
Click the Edit icon next to the hostname to edit a host.
Step 22 Enter the settings as appropriate. See Table 4-44 for a description of the fields.
Table 4-43 SNMP View Fields
Field Description
Name String representing the name of this family of view subtrees (256 characters
maximum). The family name must be a valid MIB name such as ENTITY-MIB.
Family Object identifier (256 characters maximum) that identifies a subtree of the MIB.
View Type View option that determines the inclusion or exclusion of the MIB family from the
view. Choose one of the following two options from the drop-down list:
• Included—The MIB family is included in the view.
• Excluded—The MIB family is excluded from the view.
Table 4-44 SNMP Host Fields
Field Description
Trap Host Hostname or IP address of the SNMP trap host that is sent in SNMP trap messages
from the SE.
Community/User Name of the SNMP community or user (256 characters maximum) that is sent in
SNMP trap messages from the SE.
Authentication Security model to use for sending notification to the recipient of an SNMP trap
operation. Choose one of the following options from the drop-down list:
• No-auth—Sends notification without any security mechanism.
• v2c—Sends notification using Version 2c security.
• Model v3-auth—Sends notification using SNMP Version 3 (AuthNoPriv).
• Security Level v3-noauth—Sends notification using SNMP Version 3
(NoAuthNoPriv security).
• Level v3-priv—Sends notification using SNMP Version 3 (AuthPriv
security).