Specifications

4-81
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 4 Configuring Devices
Configuring the Service Engine
Step 7 Click Submit to save the settings.
Step 8 From the left-panel menu, click Group. The SNMP Group Table page is displayed.
The maximum number of groups that can be created is ten.
Step 9 Click the Create New icon in the task bar. The SNMP Group page is displayed.
Click the Edit icon next to the Group Name to edit a group.
Step 10 Enter the settings as appropriate. See Table 4-41 for a description of the fields.
Table 4-40 SNMP Community Fields
Field Description
Community Community string used as a password for authentication when you access the
SNMP agent of the SE. The “Community Name” field of any SNMP message sent
to the SE must match the community string defined here in order to be
authenticated. You can enter a maximum of 64 characters in this field.
Group name/rw Group to which the community string belongs. The Read/Write option allows a
read or write group to be associated with this community string. The Read/Write
option permits access to only a portion of the MIB subtree. Choose one of the
following three options from the drop-down list:
• None—Choose this option if you do not want to specify a group name to be
associated with the community string.
• Read/Write—Choose this option if you want to allow read-write access to the
group associated with this community string.
• Group—Choose this option if you want to specify a group name.
Group Name Name of the group to which the community string belongs. You can enter a
maximum of 64 characters in this field. This field is available only if you have
chosen the Group option in the Group name/rw field.
Table 4-41 SNMP Group Fields
Field Description
Name Name of the SNMP group. You can enter a maximum of 256 characters.
Sec Model Security model for the group. Choose one of the following options from the
drop-down list:
• v1—Version 1 security model (SNMP Version 1 [noAuthNoPriv]).
• v2c—Version 2c security model (SNMP Version 2 [noAuthNoPriv]).
• v3-auth—User security level SNMP Version 3 (AuthNoPriv).
• v3-noauth—User security level SNMP Version 3 (noAuthNoPriv).
• v3-priv— User security level SNMP Version 3 (AuthPriv).
Read View Name of the view (a maximum of 64 characters) that enables you only to view the
contents of the agent. By default, no view is defined. In order to provide read
access to users of the group, a view must be specified.