Specifications

4-78
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 4 Configuring Devices
Configuring the Service Engine
Sample Period Time interval (in seconds) between two consecutive samples. The sample period is
the time during which the SE and the SR exchange keep-alive messages that contain
the SE load information. The range is from 1 to 60. The default is 5.
Number of
Samples
Number of most recently sampled values used when calculating the average. The
range is from 1 to 120. The default is 6.
Disk Settings
1
Enable Allows the SR to collect disk transaction information from the SE.
Threshold The threshold, as a percentage, determines the extent of disk usage allowed. The
range is from 1 to 100. The default is 80.
Sample Period Time interval (in seconds) between two consecutive samples. The range is from 1 to
60. The default is 5.
Number of
Samples
Number of most recently sampled values used when calculating the average. The
range is from 1 to 120. The default is 6.
Memory Settings
Enable Allows the SR to collect memory usage information from the SE.
Threshold The threshold (in percent) determines the extent of memory usage allowed. The
range is from 1 to 100. The default is 90.
Sample Period Time interval (in seconds) between two consecutive samples. The range is from 1 to
60. The default is 5.
Number of
Samples
Number of most recently sampled values used when calculating the average. The
range is from 1 to 120. The default is 6.
KMemory Settings
1
Enable Allows the SR to collect kernel memory usage information from the SE.
Threshold The threshold determines the extent of kernel memory usage (in percent) allowed.
The range is from 1 to 100. The default is 50.
Sample Period Time interval (in seconds) between two consecutive samples. The range is from 1 to
60. The default is 5.
Number of
Samples
Number of most recently sampled values used when calculating the average. The
range is from 1 to 120. The default is 6.
WMT Settings
Enable Allows the SR to collect stream count information from the SE.
Threshold Percentage of streams for which the SE has been either configured or licensed. The
range is from 1 to 100. The default is 90.
Sample Period Time interval (in seconds) between two consecutive samples. The range is from 1 to
60. The default is 5.
Number of
Samples
Number of most recent sampled values used when calculating the average. The range
is from 1 to 120. The default is 6.
FMS Settings
1
Enable Allows the SR to collect stream count information from the SE.
Threshold Percentage of streams for which the SE has been either configured or licensed. The
range is from 1 to 100. The default is 90.
Table 4-38 Service Monitor Fields (continued)
Field Description