Specifications

4-57
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 4 Configuring Devices
Configuring the Service Engine
Step 5 Check the Enable Disk Error Handling Threshold check box if you want to set the number of disk
errors allowed before the disk is marked as bad, and enter a number (0 to 100) in the Threshold field.
The default threshold is 10.
Step 6 Click Submit to save the settings.
Network Settings
The Network pages provide settings for network connectivity. Configuring network settings consist of
the following procedures:
• Enabling FTP Services
• Enabling DNS
• Enabling RCP
• Configuring NTP
• Setting the Time Zone
• Viewing Network Interfaces
• Configuring External IP Addresses
• Configuring Port Channel and Load Balancing Settings
• Configuring TCP Settings
• Configuring IP General Settings
• Configuring IP ACL
• Configuring Static IP Routes
Enabling FTP Services
To enable FTP services to listen for connection requests, do the following:
Step 1 Choose Devices > Devices > General Settings > Network > FTP. The FTP Settings page is displayed.
Step 2 Check the Enable FTP Services check box.
Step 3 Click Submit to save the settings.
Enabling DNS
To configure Domain Name System (DNS) servers, do the following:
Step 1 Choose Devices > Devices > General Settings > Network > DNS. The DNS Settings page is displayed.
Step 2 Enter the settings as appropriate. See Table 4-28 for a description of the fields.