Specifications

4-56
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 4 Configuring Devices
Configuring the Service Engine
Step 2 Enter the settings as appropriate. See Table 4-27 for a description of the fields.
Step 3 Click Submit to save the settings.
Setting Storage Handling
The Storage option offers disk error-handling settings.
Enabling Disk Error Handling
The Disk Error Handling page allows you to configure how disk errors are handled, and to define a disk
device error-handling threshold.
If a bad disk drive is a critical disk drive, and the automatic reload feature (disk error-handling reload
command) is enabled, the disk drive is marked as “bad” and the SE is automatically reloaded. After the
SE is reloaded, a syslog message and an SNMP trap are generated.
The disk error-handling threshold option determines how many disk errors can be detected before the
disk drive is automatically marked “bad.” By default, this threshold is set to 10.
To configure a disk error-handling method, do the following:
Step 1 Choose Devices > Devices > General Settings > Storage > Disk Error Handling. The Disk Error
Handling Settings page is displayed.
Step 2 Check the Enable check box.
Step 3 Check the Enable Disk Error Handling Reload check box if you want the device to reload the disk
when a disk with a system file system (sysfs) has problems.
Step 4 Check the Enable Disk Error Handling Remap check box if you want to set the disks to attempt to
remap disk errors automatically. This option is enabled by default.
Table 4-27 Database Maintenance Settings Fields
Field Description
Full Database Maintenance Settings
Enable When enabled, a full database maintenance routine is performed on the SE.
Every Day
Sun-Sat
The days of the week when the maintenance is performed
When Every Day is enabled, all days of the week are also enabled.
At (time) Time of day the maintenance is performed. Time is entered in 24-hour format as
hh:mm. The default is 04:00.
Regular Database Maintenance Settings
Enable When enabled, a re-indexing routine is performed on the SE.
Every Day
Sun-Sat
The days of the week when the maintenance is performed.
When Every Day is enabled, all days of the week are also enabled.
At (time) Time of day the maintenance is performed. Time is entered in 24-hour format as
hh:mm. The default is 02:00.