Specifications

4-51
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 4 Configuring Devices
Configuring the Service Engine
Note When changing the Login Grace Time, you need to first uncheck the Enable check box and
click Submit. Enter the new Login Grace Time, check Enable, and click Submit.
Step 5 Select the SSH version.
a. To allow clients to connect using SSH protocol version 1, check the Enable SSHv1 check box.
b. To allow clients to connect using SSH protocol version 2, check the Enable SSHv2 check box.
Note You can enable both SSHv1 and SSHv2, or you can enable one version and not the other. You
cannot disable both versions of SSH unless you disable the SSH feature by unchecking the
Enable check box.
Step 6 Click Submit to save the settings.
Enabling Telnet
To enable the Telnet service, do the following:
Step 1 Choose Devices > Devices > General Settings > Login Access Control > Telnet. The Telnet page is
displayed.
Step 2 Check Te lnet Enab le to enable the terminal emulation protocol for remote terminal connections.
Step 3 Click Submit to save the settings.
Setting the Message of the Day
The Message of the Day (MOTD) feature enables you to provide information bits to the users when they
log in to an SE. There are three types of messages that you can set up:
• MOTD banner
• EXEC process creation banner
• Login banner
To configure the Message of the Day settings, do the following:
Step 1 Choose Devices > Devices > General Settings > Login Access Control > Message of the Day. The
MOTD page is displayed.
Step 2 Check Enable to enable the MOTD settings. The Message of the Day (MOTD) banner, EXEC process
creation banner, and Login banner fields become enabled.
Step 3 In the Message of the Day (MOTD) Banner field, enter a string that you want to display as the MOTD
banner when a user attempts to log in to the SE.