Specifications

4-43
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 4 Configuring Devices
Configuring the Service Engine
Step 4 Click Submit to save the settings.
To enable Flash Media Streaming Service Monitoring, do the following:
Step 1 Choose Devices > Devices > Application Control > Flash Media Streaming > Service Monitoring.
The Service Monitoring page is displayed.
Step 2 Check the Enable Service Monitoring check box.
Service Monitoring monitors the Flash Media Streaming engine memory usage. If the memory usage
reaches the 1.5 GB limit for either the Flash Media Streaming core process or the Flash Media Streaming
edge process, an alarm is raised and the Service Router does not redirect any new Flash Media Streaming
requests to this SE.
Step 3 Click Submit to save the settings.
Configuring Web Engine HTTP Connections
To configure web engine HTTP connections, do the following:
Step 1 Choose Devices > Devices > Application Control > Web > HTTP > HTTP Connections. The HTTP
Connections page is displayed (Figure 4-17).