Specifications

4-40
Cisco Internet Streamer CDS 2.0-2.3 Software Configuration Guide
OL-13493-04
Chapter 4 Configuring Devices
Configuring the Service Engine
To configure the list of hosts for bypassing incoming bandwidth limits, follow these steps:
Step 1 Choose Devices > Devices > Application Control > Windows Media Streaming > Bypass List. The
Bypass List page is displayed.
Step 2 In the Windows Media BW Incoming Bypass List field, enter up to four IP addresses or hostnames of
hosts you want to bypass the incoming bandwidth check. Separate each entry with a space.
Step 3 Click Submit to save the settings.
Configuring Movie Streamer—General Settings
The Movie Streamer is an open-source, standards-based, streaming server that delivers hinted MPEG-4,
hinted 3GPP, and hinted MOV files to clients over the Internet and mobile networks using the
industry-standard RTP and RTSP.
Note In Release 2.0, Movie Streamer was in a demonstration state for live streaming, prefetched, cached and
dynamically cached content.
In Releases 2.1 to 2.3, live streaming is in full production. Prefetched, cached, and dynamically cached
content remain in a demonstration state.
For details of live streaming performance for Movie Streamer, please refer to the release-specific
performance bulletin.
Tip In Releases 2.0 and 2.1, to enable the Movie Streamer, navigate to the Movie Streamer page (Devices >
Devices > Application Control > Movie Streamer), check the Enable check box, and click Submit.
In Release 2.2, to configure the general settings for Movie Streamer, do the following:
Step 1 Choose Devices > Devices > Application Control > Movie Streamer > General Settings. The Movie
Streamer General Settings page is displayed.
Step 2 Enter the settings as appropriate. See Table 4-17 for a description of the fields.
Table 4-17 Movie Streamer General Settings Fields
Field Description
Enable Movie Streamer Services When checked, Movie Streamer Services is enabled. To disable
services, uncheck the check box.
Movie Streamer Proxy Settings
Host Name Hostname or IP address of the proxy server for Movie Streamer.
Port Port of the proxy server for Movie Streamer. Valid port numbers
range from 1 to 65535. The default is 554.
Movie Streamer General Settings
Maximum Concurrent
Connections: Override Default
and Custom Value
To override the default maximum number of concurrent sessions,
check the check box and enter a value in the Custom Value field.
The default is 8000 sessions. The range is from 1 to 16000.