Specifications

4-26
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
System Level Configuration
Step 3 Click Submit.
To clear the settings, click Reset.
Configuring Ingest Tuning
The Ingest Tuning page allows you to set the speeds of the trick-mode files created for each ingested
content and configure the ingest error detection settings in the Fail Ingest Settings section.
Note The Fail Ingest Settings section is only displayed if the Fail Ingest Tuning feature is enabled. The Fail
Ingest Tuning feature is enabled by default. For more information, see the “Fail Ingest Tuning” section
on page F-5.
To view the current ingest tuning settings choose Configure > System Level > Ingest Tuning.
To configure the ingest tuning, do the following:
Step 1 Choose Configure > System Level > Ingest Tuning. The Ingest Tuning page is displayed.
Step 2 Enter the ingest tuning settings as appropriate. See Table 4-10 for descriptions of the fields.
Encryption URL Location on the encryption server used to send MPEG files for encryption. An
example of the Encryption URL is
http://192.168.128.54:7898/files/encrypted, where the IP address, port, and
directory is specified.
Encryption FTP URL Location on the encryption server used to retrieve encrypted MPEG files. An
example of the Encryption FTP URL is
ftp://192.168.128.54:7899/files/encrypted, where the IP address, port, and
directory is specified.
Table 4-9 Ingest Manager Fields (continued)
Field Description
Table 4-10 Ingest Tuning Fields
Field Description
Trick-Mode Settings
Speed 1 You can set eight different trick-mode speeds for each ingested content. A
trick-mode file, either fast-forward or rewind (–X), is created for each selected
speed.
Choose the trick-mode speed from the drop-down list and click Submit.
Available trick-mode speeds are 2, 4, 5, 6, 8, 10, 15, 30, 32, 60, and 127.
To reset the values and start over, click Reset.
Speed 2
Speed 3
Speed 4
Speed 5
Speed 6
Speed 7
Speed 8