Specifications

4-22
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
System Level Configuration
Vau l t M a st e r
Port
Port used by the master Content Service for controlling content. The Content Service Master Port is the same
for all Vaults in the array. The default is 3200.
Web Service
Port
Port number used by web service processes listening on this server. The default is 8080.
MSA Support Enabling Managed Services Architecture (MSA) routes successful events to the ISA event channels and
error events to either the Event Posting Agent (EPA) or the Event Log Agent (ELA).
Events consist of three basic groups: subsystem-component state, faults, and measurement points. State and
faults allow a monitoring tool to verify the current health of the system, while measurement points allow a
monitoring tool to view the transactional state of the system and determine how it is performing.
Pre-Encryption
Support
Enable or disable Motorola pre-encryption support. Pre-encryption is disabled by default. Pre-Encryption
Support must be enabled for Dual CAS. For more information, see the “Configuring MPEG Tuning” section
on page 4-29.
TME/SCE From the TME/SCE drop-down list, select Enable for MystroMDN for Stream Control Events (SCE) or
Enable for OpenStream for Trick-Mode Events (TME).
Enabling TME requires that the stream service and LSCP or RTSP service deliver more CORBA events to
the Stream Event Channel. These extra events are triggered during the transitions from one content to
another in the play list of the stream. The CORBA event for stream destroy also carries the history of all
transitions of the stream.
Enabling SCE allows real-time splicing of MPEG-2 transport streams for digital program insertion
(including advertisement insertion) in live content as well as content recorded for the purpose of enabling
time-shifted on-demand services. Pre-roll, post-roll, and mid-roll placements of digital program insertion is
supported. The Vault detects the SCTE-35 cues and processes them at the time of ingest. The
StreamExtChannel event channel on the CORBA NotificationService is used to send
ContentSignalingEvents that contain the SCTE-35 cue information to the backoffice.
Note The SCTE-35 cue message cannot be greater than 400 bytes.
Note The configuration change of the TME/SCE setting requires that the ISA service is restarted on both
the VVIM and the Stream Manager (or the legacy CDS). To restart the ISA service, choose Maintain
> Services, select the check box for ISA, and click Submit.
Config File
Name
1
Name of the file that stores the ISA configuration settings. The default is isa.cfg.
FTP Out Port Port number used by the ISA 1.5 FTP Out feature.
Content Store Settings
Content Store
Name
Name of the CDS Content Store object that is registered with the OpenStream system.
Content Store
Kind
Content store ID extension. The default is Factory.
Content
Factory ID
Name of the CDS Content Store Factory that is registered with the OpenStream system. The Content Store
Factory allows the creation of Content Store objects, and the Content Store objects act as factories for
Content objects.
Content
Factory Kind
Content store factory ID extension. The default is Factory.
Content No. of
Threads
Content store number of threads. The default is 32, which is also the recommended setting.
Table 4-8 Shared ISA Fields (continued)
Field Description