Specifications

4-15
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
System Level Configuration
Figure 4-6 Headend Setup—GQAM with ASI Streaming Mode
Step 2
Enter the settings as appropriate. See Table 4-6 for descriptions of the fields.
Note You can use the Tab key to cycle through the fields. The tab order starts with the RF service group, and
then cycles through the TSIDs for that RF.
Step 3 Check the information you entered, correct any errors, and click Submit. The new entry is added.
To reset the fields, click Reset.
Table 4-6 GQAM Headend Setup Fields
Field Description
TSID out Output transport stream ID (TSID out) is the identifier of a downstream
transport stream port on the GQAM device that supplies streams to the
specified service group.
link (TSID out) Enable or disable the link to the associated TSID out and service group.
Service Group Service group that maps to the specified TSID out on this GQAM device.