Specifications

4-13
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
System Level Configuration
Figure 4-5 Headend Setup for NSG
Note You can use the Tab key to cycle through the fields. The tab order steps through the all the fields in the
column on the left before moving on to the next column.
Step 2 Check the information you entered, correct any errors, and click Submit. The new entry is added.
To reset the fields, click Reset.
Table 4-5 NSG, Prisma, Path1 Headend Setup Fields
Field Description
TSID in Input transport stream ID (TSID in) is the identifier of a transport stream on the
QAM gateway that sends streams to the QAM device.
link (TSID in) Enable or disable the link to the associated TSID in, TSID outs, and service
groups.
TSID out Output transport stream ID (TSID out) is the identifier of a downstream
transport stream port on the QAM device that supplies streams to the specified
service group.
link (TSID out) Enable or disable the link to the associated TSID out and service group.
svc. group Service group that maps to the specified TSID out on this QAM device.