Specifications

4-7
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
System Level Configuration
To configure a QAM gateway, do the following:
Step 1 Choose Configure > System Level > QAM Gateway. The QAM Gateway page is displayed
(Figure 4-2).
Note If Bulk Configuration is enabled, the Configuration File Location field is displayed, along with
the Browse and Import buttons. To import a Bulk Configuration XML file, click Browse to
locate the file, then Import to import the file. The status of the import is displayed in the left
panel.
For information on enabling the Bulk Configuration feature, see the “Bulk Configuration”
section on page F-5. For information about creating a Bulk Configuration file for QAM
Gateways, see the “Creating QAM Gateway and Headend Setup Bulk Configuration Files”
section on page B-2.
Step 2 From the drop-down list, choose enter new and click Next.
Figure 4-2 QAM Gateway Page with ASI Streaming for Multi-Site
Step 3
Enter the QAM gateway settings as appropriate. See Table 4-4 for descriptions of the fields.