Specifications

3-8
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 3 Getting Started
Configuration Workflows
Split-Domain Management Configuration Workflow
Table 3-3 lists the basic tasks, in the recommended order, for configuring the VVI with split-domain
management (VVIM and Stream Manager) for content delivery with references to the associated sections
in each chapter. For more information, see Chapter 2, “Network Design,”and the “CDSM or VVIM
Setup” section on page F-3.
Table 3-3 VVI Split-Domain Configuration Workflow
Task Manager Description Where to Find More Information
Change
administrator
password
VVIM and Stream
Manager
Change the administrator password for the
CDSM.
Editing User Settings, page 7-5
Interface setup VVIM and Stream
Manager
Configure the different interfaces on the CDS
servers.
Configuring the Interfaces,
page 4-109
Server setup VVIM and Stream
Manager
Configure the IP addresses and ports for the
interfaces, as well as other settings such as
quality of service (QoS).
Configuring the Servers,
page 4-112
Route table VVIM and Stream
Manager
Route Table identifies destination subnetworks
for cache, stream, and stream control
interfaces. Route Table is optional.
Configuring the Route Table,
page 4-118
Stream groups
setup
Stream Manager A Stream Group consists of one or more
Streamers. Stream Groups relate to QAM
gateways or destination subnetwork by the
Stream Group preference.
Configuring Stream Groups,
page 4-58
Control and setup
IPs
Stream Manager Configure the Control server and Setup server
IP address for the Stream Groups.
Configuring the Control and
Setup IPs, page 4-72
Shared or
distributed ISA
settings
VVIM Configure the ISA settings for the Vaults, and
the settings that is shared with the Streamers.
Configuring Distributed/ Shared
ISA Settings, page 4-20
Cache Groups
setup
VVIM A Cache Group consists of one or more
Caching Nodes.
Configuring Cache Groups,
page 4-65
VHO setup Stream Manager Group Stream Groups into video hub offices
(VHOs) that have the same ISA settings
Grouping Stream Groups into
VHOs, page 4-54
VHO ISA settings Stream Manager Configure the ISA settings for each VHO. Configuring VHO ISA Settings,
page 4-55
Stream to cache
mapping
Stream Manager Cache Groups are mapped to Stream Groups
and given a preference.
Mapping Stream Groups to
Cache-Fill Sources, page 4-68
QAM gateways
1
1. If the Stream Destination feature is set to IPTV, the QAM Gateway page and Headend Setup page are replaced with the Stream Destination page. A
setting of Mixed for Stream Destination displays all three pages, For more information, see the “Configuring Stream Destinations” section on page 4-17.
Stream Manager Configure the QAM Gateways for the CDS. Configuring QAM Gateways,
page 4-4
Headend setup
1
Stream Manager Configure service groups for gigabit Ethernet
streaming, ASI streaming, and barker streams.
Configuring the Headend Setup,
page 4-9
Ingest tuning VVIM Configure the trick-mode speeds for ingested
content.
Configuring Ingest Tuning,
page 4-26