Specifications

F-1
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
APPENDIX
F
Engineering Access Level Pages
This appendix describes the VVIM or CDSM pages available through the Engineering access level. The
Engineering access level provides the following pages:
• CDSM or VVIM Diagnostics, page F-2
• CDSM or VVIM Setup, page F-3
• System Configs, page F-12
The Engineering access level is primarily used for initializing the CDS at the time of installation and for
system diagnostics. After your system has been configured, you should not require an engineering access
level user for day-to-day operations.
When you log in to the CDSM with a user account that has Engineering access level, the first page that
is displayed is the CDSM Setup page. All the other CDSM pages that are available with the Master
access level are still available with the Engineering access level.
In an RTSP environment, the Configure > Server Level > RTSP Setup page displays four additional
fields:
• Database Connect Size
• UDP Packet Size
• Threadpool Size
• Max Sessions
These fields are only for diagnostic purposes, and their values should not be changed.
Note When you configure the CDSM for Virtual Video Infrastructure (VVI), all references to CDSM are
changed to Virtual Video Infrastructure Manager (VVIM) for the Vault and Caching Node manager. For
example, the CDSM Audit Logs available through the Report > System Level left-panel menu is
changed to the VVIM Audit Logs when VVI is configured on the CDSM Setup page, which changes to
the VVIM Setup page.