Specifications

E-4
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Appendix E Using the TV CDS Streamer Application Monitoring Tool
AMT Statistics
RTP Sessions
Displays the following information on VOD Sessions that can be filtered by session ID, or session
destination and subnet mask:
• Status
• Session ID
• Content name
• Source IP address and port
• Destination IP address and port
• Bit rate (Kbps)
• Repair Enabled
If a filter is entered, click Submit to see the filtered results. If the number of VOD sessions spans several
pages click the Prev Page and Next Page to view the other pages.
Error Repair
Configuration Displays the configuration settings for this Streamer that were set on the
CDSM GUI. For more information, see Chapter 4, “Configuring the CDS.”
Statistics Displays the following information:
• Generic NACK Messages Received
– Total Messages
– Invalid Messages
• Repair RTP Packets
– Requested
– Sent
– Not Sent
• Inbound and Outbound Error Repair Request Average Rate (packets per
second)
– 5 Second (interval)
– 1 Minute (interval)
– 5 Minute (interval)
– 15 Minute (interval)
• Advanced—Displays Advanced Debug Statistics for Error Repair. Click
Advanced to see these statistics.
For more information about the Error Repair statistics, see the “Viewing Error
Repair Statistics” section on page E-5.
Excess BW Displays histogram for Error Repair e-Factor. For more information, see the
“Viewing Excess Bandwidth” section on page E-7.
Table E-1 AMT GUI Pages (continued)
Navigation Tree and
Tab Information Provided