Specifications

D-3
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Appendix D SNMP MIB and Trap Information
SNMP Management Objects and Traps
The CISCO-CDS-TV-MIB.my file has the following MIB nodes:
• cdstvConfigObjects—Configuration of servers
• cdstvMonitorObjects—Monitoring of cache-fill, streaming, disk states, and services running
• cdstvNotifyObjects—Objects specific to traps (notifications), for example, Managed Services
Architecture (MSA) event objects
Table D-1 describes the traps in the CISCO-CDS-TV-MIB.
Table D-1 Cisco TV CDS Traps
Trap Description
cdstvDiskHealthUp Previously inactive disk is now active and ready, that is, the disk has
returned to the OK (0) state.
cdstvDiskHealthDown Active disk is now inactive, that is, it has left the OK (0) state.
cdstvMSAEvent MSA event (error) has occurred.
cdstvServiceUp Previously stopped service is now running, that is, it has left the not
running state. The cdstvServiceName object, which contains the name
of the service, is sent with the trap.
cdstvServiceDown Previously running service is now stopped, that is, it has left the running
state. The cdstvServiceName object, which contains the name of the
service, is sent with the trap.
cdstvDiskUsageHigh Disk usage on the system has crossed the maximum usage threshold.
The cdstvDiskUsagePercent object, which contains the percentage of
the disk that is used, is sent with the trap.
This trap corresponds to the Disk Capacity Notify field on the System
Threshold page. For more information, see the “Setting System
Thresholds” section on page 7-13. When the disk usage exceeds the
threshold set for the Disk Capacity Notify field, the
cdstvDiskUsageHigh trap is sent.
cdstvDiskUsageNormal Disk usage on the system has returned to a value within the usage
threshold. The cdstvDiskUsagePercent object, which contains the
percentage of the disk that is used, is sent with the trap.
cdstvLinuxFSUsageHigh Linux file system (FS) usage on the server has crossed the maximum
usage threshold. The cdstvLinuxFSMountPoint and
cdstvLinuxFSUsagePercent objects, which contain the mount point and
the percentage used, are sent with the trap.
cdstvLinuxFSUsageNormal Linux file system (FS) usage on the server has returned to a value within
the usage threshold. The cdstvLinuxFSMountPoint and
cdstvLinuxFSUsagePercent objects, which contain the mount point and
the percentage used, are sent with the trap.
cdstvPortLossHigh Port loss on the system has crossed the maximum threshold. The
cdstvPortLossPercent object, which contains port loss percentage, is
sent with the trap.
cdstvPortLossNormal Port loss on the system has returned to a value within the threshold. The
cdstvPortLossPercent object, which contains port loss percentage, is
sent with the trap.