Specifications

D-2
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Appendix D SNMP MIB and Trap Information
SNMP Management Objects and Traps
# chkconfig --add snmpd
The following command configures snmpd to be turned on in run levels 5 and 6:
# chkconfig --level 56 snmpd on
SNMP Log
The SNMP log file, snmpd.log, is located in the /arroyo/log directory. All log entries use UTC for the
time stamp. All TV CDS-specific SNMP traps are logged in the snmpd.log file.
SNMP Management Objects and Traps
The CDS SNMP agent and Management Information Base (MIB) file are compliant with the Internet
Engineering Task Force (IETF) standards for SNMP v1, SNMP v2c, and SNMPv3. For a list of
SNMP-associated Request For Comment (RFC) specifications, see the “RFC Compliance” section on
page D-6.
The Cisco TV CDS MIBs consist of the following:
• CISCO-CDS-TV-MIB.my
• CISCO-CDSTV-SERVICES-MIB.my
• CISCO-CDSTV-FSI-MIB.my
• CISCO-CDSTV-INGESTMGR-MIB.my
• CISCO-CDSTV-BWMGR-MIB.my
• CISCO-CDSTV-INGEST-TUNING-MIB.my
• CISCO-CDSTV-CS-STATS-MIB.my
• CISCO-CDSTV-AUTHMGR-MIB.my
• CISCO-CDSTV-SERVER-MIB.my
• CISCO-CDSTV-ISA-MIB.my
The Cisco TV CDS MIBs are available through the CDSM, and are dependent on the following MIBs
distributed on Cisco.com:
• ftp://ftp.cisco.com/pub/mibs/v2/CISCO-SMI.my
• ftp://ftp.cisco.com/pub/mibs/v2/CISCO-TC.my
• ftp://ftp.cisco.com/pub/mibs/v2/CISCO-PRODUCTS-MIB.my
• ftp://ftp.cisco.com/pub/mibs/v2/INET-ADDRESS-MIB.my
• ftp://ftp.cisco.com/pub/mibs/v2/DIFFSERV-DSCP-TC.my
You can download the MIBs by doing the following:
Step 1 Choose Configure > Server Level > SNMP Agent. The SNMP Agent page is displayed with a list of
the MIB files at the bottom of the page.
Step 2 To save the file locally, right-click the MIB filename, and choose Save As, Save Target As, or a similar
save command.
To view the file, click the MIB filename.