Specifications

C-1
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
APPENDIX
C
BMS Communication
This appendix describes the required Business Management System (BMS) configuration settings
necessary for communicating with the CDS.
OpenStream/ISA
This section is not meant to replace the OpenStream installation manual. Instead, it is more of a a “cheat
sheet” offering a list of values that must be the same on both the OpenStream BMS and the CDS to ensure
communication between them. For more information, see the OpenStream Installation Manual.
The CDS communicates with the OpenStream BMS through the OpenStream CORBA Naming and
Notification Services. Table C-1 describes the IP addresses of the OpenStream CORBA Naming and
Notification Services that must be configured on the CDS.
Table C-1 OpenStream IP Addresses
Content Delivery
System Parameter OpenStream Component
Name Service IP The IP address of the CORBA Naming Service used by the OpenStream BMS.
Typically, this service resides on the same server as the OpenStream BMS.
For more information about this parameter in the CDS, see the “Configuring
the Vault for BMS Connectivity” section on page 4-50 or the “Configuring the
Streamer for BMS Connectivity” section on page 4-45.
Notify Service IP The IP address of the CORBA Notification Service used by the OpenStream
BMS. Typically, this service resides on the same server as the OpenStream
BMS.
For more information about this parameter in the CDS, see the “Configuring
the Vault for BMS Connectivity” section on page 4-50 or the “Configuring the
Streamer for BMS Connectivity” section on page 4-45.