Specifications

B-5
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Appendix B Creating Bulk Configuration Files
Creating QAM Gateway and Headend Setup Bulk Configuration Files
For information about the values of the attributes, see the “Configuring QAM Gateways” section on
page 4-4 and the “Configuring the Headend Setup” section on page 4-9. The ServerID and GroupID
attributes are assigned during the initial configuration of the server and are displayed as server ID and
group ID on the Server Setup page. For more information, see the “Configuring the Servers” section on
page 4-112.
QAMLink — Status
ServiceGroup
RFNumber
Used for the following ASI QAM
devices:
• NSG-8108
• NSG-9000
• NSG-9116
• GQAM Shared
• SA xDQA
• MOTO Sem8
• MOTO Sem12
• GigE Gen (with up to 24 service
groups and RF ports)
The Type attribute value of the QAM
element must be one of the above values.
QAMASILink TSIDOutLink Number
TSIDIn
TSIDInLinkStatus
Used for the following ASI QAM device
types:
• NSG-8204
• Prisma-seq
• Prisma-even
• Prisma-odd
• Path1-CX810
The Type attribute value of the QAM
element must be one of the above values
GQAMLink TSIDOutLink ServiceGroup
RFNumber
Used for the GQAM ASI QAM device.
The Type attribute value of the QAM
element must be GQAM.
TSIDOutLink — Index
TSIDOut
TSIDOutLinkStatus
ServiceGroup
RFNumber
Maps TSID In to TSID Outs for
applicable ASI QAM devices.
Table B-3 Bulk Configuration File Elements for ASI QAM Gateways (continued)
Tag Elements Attributes Description