Specifications

B-4
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Appendix B Creating Bulk Configuration Files
Creating QAM Gateway and Headend Setup Bulk Configuration Files
<ServiceGroupToStreamGroup ServiceGroup="4666664" StreamGroup="NEWTEST" />
<ServiceGroupToStreamGroup ServiceGroup="4666663" StreamGroup="s234" />
<ServiceGroupToStreamGroup ServiceGroup="1666669" StreamGroup="NEWTEST123" />
<ServiceGroupToStreamGroup ServiceGroup="1666668" StreamGroup="s234" />
<ServiceGroupToStreamGroup ServiceGroup="1666664" StreamGroup="NEWTEST" />
<ServiceGroupToStreamGroup ServiceGroup="1666663" StreamGroup="s234" />
</Headend>
QAM Gateway and Headend Setup Bulk Configuration for ASI Streaming
If the streaming mode is set to ASI, the QAM Gateway page is used to identify the QAM device by the
IP address and the QAM type, and configure the preference settings for the Stream Groups. For Layer 2
networks, there is an option to specify the MAC address of the next hop for each Stream Group and
Streamer.
Table B-3 defines the Bulk Configuration file elements for QAM gateways and headend setup for ASI
streaming.
Table B-3 Bulk Configuration File Elements for ASI QAM Gateways
Tag Elements Attributes Description
Headend QAM — Marks beginning and end of ASI QAM
devices and the headend setup
configuration
QAM QAMStreamGroupPreference
QAMLink
QAMASILink
GQAMLink
IP
Type
GQAMPort
Defines an ASI QAM device. The Type
attribute must be one of the types listed
for the associated element (QAMLink,
QAMASILink, or GQAMLink). The
GQAMPort attribute is only used for
QAM Type GQAM.
QAMStreamGroupPreference Server StreamGroupName
QAMMAC
Preference
Maps Stream Groups to the QAM
device. The QAMMAC attribute is
optional and is only used for Layer 2
networks.
Server — ServerID
GroupID
QAMMAC
Optional. Maps the MAC address of a
QAM device to a Streamer. Only used in
Layer 2 networks.