Specifications

B-1

Cisco TV CDS 2.5 ISA Software Configuration Guide

OL-24788-01

APPENDIX

Creating Bulk Configuration Files

This appendix describes the Bulk Configuration feature and consists of the following topics:

• Introduction, page B-1

• Creating QAM Gateway and Headend Setup Bulk Configuration Files, page B-2

• Creating Stream Destination Bulk Configuration Files, page B-9

• Creating Route Table Bulk Configuration Files, page B-10

• Creating SNMP Agent Bulk Configuration Files, page B-11

• Creating DNS Server Bulk Configuration Files, page B-12

• Creating NTP Server Bulk Configuration Files, page B-13

• Bulk Configuration XML Schema, page B-14

Introduction

Bulk Configuration provides a method of configuring common parameters for all the servers at one time

by using an XML file. Following are the CDSM GUI configuration pages that offer Bulk Configuration:

• QAM Gateway

• Headend Setup (For gigabit Ethernet streaming mode. ASI streaming headend configuration is

imported as part of the QAM Gateway page configuration importing.)

• Stream Destination

• NTP Server

• Server DNS

• SNMP Agent

• Route Tables

• RTSP Setup

• FSI Setup

Note To enable the optional Bulk Configuration feature, see the “Bulk Configuration” section on page F-5.