Specifications

A-9
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Appendix A Troubleshooting
General Information and Issues
Description of the .arroyorc Settings
This section describes the different line entries of the .arroyorc file. The .arroyorc file is located in the
/home/isa directory and is created during the initial configuration procedure outlined in the Cisco
Content Delivery Engine 205/220/250/420 Hardware Installation Guide.
self
This number represents what type of server the CDE is:
• 0 = ISV (also known as SSV)
• 1 = Vault
• 2 = Streamer
• 3 = CDSM
groupid
All servers that are part of the same CDS system (managed by one CDSM) have the same group ID. This
group ID should be unique across an enterprise. The purpose of the group ID is to allow servers in a
group to recognize each other as belonging to the same group. If two server groups were on the same
VLAN and they had the same group number they would conflict and cause issues. This is much more
likely to be an issue in a lab environment with shared resources than an actual production deployment
but this should still be managed.
serverid
Every server in the group has to have a unique ID ranging from 1 to 255. It is a good idea to use a
standardized numbering solution; for example, all 1xx serverids are Streamers and all 2xx server IDs are
Vau l ts .
vault
This parameter has the IP address of a Vault in the system. Each “vault” line represents an individual
Vault. There may be multiple vault lines.
streamer
This is the IP address of a Streamer in the system. Each “streamer” line represents an individual
Streamer. There may be multiple streamer lines.
Table A-2 ID Names in the CDSM GUI and CServer Files
CDSM GUI ID Name CServer Files ID Name
Array ID on the Array Name page groupid
Group ID on the Server-Level pages groupid
Stream Group ID on the Server Setup page arrayid
Cache Group ID on the Server Setup page arrayid
Vault Group ID on the Server Setup page arrayid
Stream Group ID on the Configuration Generator page arrayid