Specifications

7-24
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 7 System Maintenance
Manuals
• Duplicate Locate IP Addressees—Two or more identical entries in the control IP map table for a
single Cache Group, having the same group ID, locate IP, and locate subnet IP. If this has occurred,
select any one of the entries for removal, and the CDSM automatically reduces the number of entries
to one.
• Multiple Locate IP Addresses—More than the required single-entry for a Cache Group, and the
entries are not identical in that they have differing IP addresses or subnets. If this has occurred,
select the entries you want removed.
Out of Range Group IDs
Sometimes the CDSM is configured as a legacy system with Stream Groups and Vault Groups, only later
to find that it was incorrectly configured and needs to be changed to a VVIM or Stream Manager. This
creates Stream Group map table entries that use the incorrect group ID range with no method of
removing them from the CDSM GUI because the configuration pages for groups correctly filters out the
incorrect group IDs from the drop-down lists. The Out of Range Group IDs check cleans up these groups.
SERVERMAP and STATMAP Inconsistencies
When adding a large number of CDS servers to a CDSM, mistakes can be made with regard to the
.arroyorc file found on each CDS server (for example, incorrect group ID [array ID] or IP address). This
can lead to incorrect entries in the server STATMAP table. Additionally, servers that are not removed
correctly can also leave an incorrect entry in the server STATMAP table. The server STATMAP table
table is used to generate the System Monitor content and errors in it can lead to display issues and
incorrect states being displayed.
Extra or Incorrect SERVERMAP Entries
If the CDSM is reconfigured or reinstalled for a different type of CDS (legacy or VVI) and the CDSM
is not properly wiped clean, there could be residual entries in the SERVERMAP15 table and STATMAP
table that do not apply to the current configuration.
Manuals
To view the manual, choose Maintain > Manuals. The Manual page is displayed. Click the link to the
manual. The manual is displayed by means of the Acrobat Reader plug-in for your browser.
Tip To download the manual to your computer, right-click the link of the manual and save the manual to a
location on your hard drive for later viewing.