Specifications

7-15
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 7 System Maintenance
Restarting the Services
Restarting the Services
Each server runs services that allow the server to function with other components in the CDS. Services
are not automatically restarted each time there is a configuration change. If you need to restart a service,
the Services Restart page provides this option. This action does not power cycle the unit. Table 7-7
describes the different services.
To restart a service, do the following:
Step 1 Choose Maintain > Services. The Services Restart page is displayed.
Step 2 From the Server IP/Name drop-down list, choose the IP address or nickname of the server and click
Display. The server type and ID, as well as the array ID, are displayed.
Step 3 Select the check box next to each service you want to restart and click Submit.
To clear the fields and start over, click Reset.
Content Manager
The Content Manager page allows deletion of multiple content objects.
Note The Content Manager page is part of the TV Playout feature and is displayed only if TV Playout feature
is enabled. For more information, see the “Playout Scheduler” section on page F-11.
To delete multiple content objects, do the following:
Step 1 Choose Maintain > Services > Content Manager. The Content Manager page is displayed with the 100
most recent ingests listed.
The first text box and Display button provide access to the details of a completed ingest object and takes
you to the Monitor > System Level > Completed Ingests page. Enter the first character of the content
object name in the text box. A drop-down list of content objects is displayed. If there are more than 25
Table 7-7 Restart Services Options
Service Description
Reload Service Groups Any time there are changes (adding, editing, or deleting) to the QAM
Gateway or Headend Setup configuration, it is necessary to reload the
service groups. If the Content Storage feature is enabled, the Reload
Service Group option is not available. It is not necessary to reload the
service groups if the Content Storage feature is enabled.
ISA/OpenStream Any time there are changes to the Streamer BMS or Vault BMS pages, it
is necessary to restart the ISA/OpenStream service. If the Content Storage
feature is enabled, it is not necessary to reload the ISA/OpenStream
service, and therefore the option is not available.
SNMP Any time there are changes to the SNMP configuration, it is necessary to
restart the SNMP service.