Specifications

6-7
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 6 System Reporting
Stream Activity
Streams by Array
The Stream by Array report lists all streams currently active for a specified group of Streamers.
To view the Stream by Array report, do the following:
Step 1 From the Available Reports drop-down list, choose Streams By Array. Figure 6-5 shows the selection
fields for the Streams by Array report.
Figure 6-5 Stream by Array Report Selection Fields
Step 2 From the Stream Array drop-down list, choose a stream array.
Step 3 Choose a modifier. See Table 6-3 for a description of each modifier.
Step 4 Using the drop-down lists provided, or the calendars, choose a From Date and To Da te for the report.
Table 6-3 Streams by Array Modifiers
Modifier Description
None (Date
Only)
Displays a list of all streams (Session ID Summary report) filtered by the from
and to dates.
Service Group Filters the report by the service group you choose in a later step.
STB MAC Filters the report by the set-top box MAC address you specify in a later step.
QAM IP Filters the report by the IP address of the QAM
1
device you choose in a later
step.
1. QAM = quadrature amplitude modulation.