Specifications

5-22
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 5 System Monitoring
Monitoring Stream Objects
Table 5-7 describes the stream failure details.
Table 5-8 lists the CDSM GUI ID names and maps them to the CServer names in the setupfile and
.arroyorc files.
Table 5-7 Stream Failure Details
Field Description
Session ID Session ID of the failed stream.
Failure Date Date and time the failure occurred.
QAM IP IP address of the QAM device associated with the failure.
Service Group Service group associated with the failure.
Server ID Server responsible for streaming this stream object. To view the IP address
associated with the Server ID, see the “Configuring the Servers” section on
page 4-112.
Group ID All servers that are part of the same CDS system (managed by one CDSM) have the
same Group ID. This Group ID corresponds to the CDSM GUI array ID and should
be unique across an enterprise. Table 5-8 describes the ID mapping between the
CDSM GUI and the CServer.
Failed Operation Operation that was taking place when the stream failed, for example, createStream,
LSCP Command(), or createServant, destroy. These are the measurement points or
transactional states of the system at the time of the failure.
Failed Task Failed task is the event category that provides the type of execution sequence that
the call stack was currently in at the time of the failure. The list of the high-level
categories are:
• Tune In
• Load Application
• Load Catalog
• Eligibility Check
• Select Subscription
• Purchase Subscription
• Select Movie
• Purchase Check
• Play Movie
• Movie Setup
• Movie Control
• Movie Confirm
• Purchase Confirm
• Purchase Log
• Stop Movie
• Movie Release
Error Code Error code provides a description of the event that caused an error. See Table 5-9,
Table 5-10, and Table 5-12 for descriptions of the error codes.
Table 5-8 ID Names in the CDSM GUI and CServer Files
CDSM GUI ID Name CServer Files ID Name
Array ID on the Array Name page groupid
Group ID on the Server-Level pages groupid
Stream Group ID on the Server Setup page arrayid
Cache Group ID on the Server Setup page arrayid