Specifications

4-126
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Server Level Configuration
Step 4 Click Submit.
To clear the fields and start over, click Reset.
To delete the DNS settings, check the Delete check box and click Delete Entry.
Configuring the Server Level NTP
The NTP Server page is used to configure up to 16 NTP servers.
To configure the NTP settings for a server, do the following:
Step 1 Choose Configure > Server Level > NTP Server. The NTP Server page is displayed.
Note If Bulk Configuration is enabled, the Configuration File Location field is displayed, along with
the Browse and Import buttons. To import a Bulk Configuration XML file, click Browse to
locate the file, then Import to import the file. The status of the import is displayed in the left
panel.
For information on enabling the Bulk Configuration feature, see the “Bulk Configuration”
section on page F-5. For information about creating a Bulk Configuration file for NTP servers,
see the “Creating NTP Server Bulk Configuration Files” section on page B-13.
Step 2 Choose the IP address of the server from the drop-down list and click Display.
Step 3 In the New NTP Server field, enter the IP address of the NTP server.
Step 4 Click Submit.
To clear the fields and start over, click Reset.
To delete the NTP settings, check the Delete check box and click Delete Entry.
Table 4-44 DNS Fields
Field Description
New Domain
Suffix
Specify, if applicable, the internal domain that is used to fully qualify an
unqualified hostname. For example, if you are using OpenStream as the BMS,
specify a subdomain consistent with what OpenStream is using, for example,
bms.n2bb.com. Accordingly, unqualified hostnames used in CORBA transactions,
such as contentstore, resolve correctly to contentstore.bms.n2bb.com.
New DNS Server IP address of the DNS server.