Specifications

4-125
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Server Level Configuration
Configuring the Server Level DNS
The Server DNS page is used to configure up to 16 domain suffixes and 16 DNS servers.
To configure the DNS settings for a server, do the following:
Step 1 Choose Configure > Server Level > Server DNS. The Server DNS page is displayed (Figure 4-51).
Note If Bulk Configuration is enabled, the Configuration File Location field is displayed, along with
the Browse and Import buttons. To import a Bulk Configuration XML file, click Browse to
locate the file, then Import to import the file. The status of the import is displayed in the left
panel.
For information on enabling the Bulk Configuration feature, see the “Bulk Configuration”
section on page F-5. For information about creating a Bulk Configuration file for DNS servers,
see the “Creating DNS Server Bulk Configuration Files” section on page B-12.
Figure 4-51 Server DNS Page
Step 2 Choose the IP address of the server from the drop-down list and click Display.
Step 3 Enter the DNS Server Level settings as appropriate. See Table 4-44 for descriptions of the DNS fields.