Specifications

4-123
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Server Level Configuration
Permissions The permissions for the community are:
• read-only
• read/write
The default is read/write.
If you do not choose a permission setting for a community you are adding,
read/write privileges are applied.
User-based Security Model
User Name Name of a user defined in this SNMP agent (also known as SNMP engine). The
same name is defined and used in a network management station (NMS).
Authentication
Type
Protocol used for user authentication is either MD5 or SHA-1. Both are used in
conjunction with HMAC. The default is MD5.
Authentication
Password
Password used for user authentication; the minimum length is eight characters.
Encryption Type Protocol used for encryption is either DES or AES.
Note Encryption is not enabled unless Encryption is selected in the VACM
Authentication drop-down list.
Encryption
Password
Password used for encryption; the minimum length is eight characters.
View-based Access-Control Model
User Name Name of user granted access to the specified object or OID sub-tree.
Access Permissions granted to this user for this object or OID sub-tree is either
read-only (GET) or read-write (GET/SET).
Note Currently, CDS-TV objects support only GET requests.
Authentication Authentication types available are the following:
• None—Only user name is matched, no passwords.
• Authentication—Password-based user authentication is used. Both
username and password must match to get access.
• Encryption—Password-based user-authentication is used; additionally,
SNMP traffic is encrypted.
OID Specific object or OID sub-tree the user is able to access.
Note If OID field is left blank, it means all OIDs are accepted.
Trap Management
Trap Station The IP address or Fully Qualified Domain Name (FQDN) of a network
management station.
Table 4-43 SNMP Agent Fields (continued)
Field Description