Specifications

4-120
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Server Level Configuration
To configure a route, do the following:
Step 1 Choose Configure > Server Level > Route Tables. The Routing Table page is displayed (Figure 4-50).
Note If Bulk Configuration is enabled, the Configuration File Location field is displayed, along with
the Browse and Import buttons. To import a Bulk Configuration XML file, click Browse to
locate the file, then Import to import the file. The status of the import is displayed in the left
panel.
For information on enabling the Bulk Configuration feature, see the “Bulk Configuration”
section on page F-5. For information about creating a Bulk Configuration file for Route Tables,
see the “Creating Route Table Bulk Configuration Files” section on page B-10.
Figure 4-50 Route Table Page—Layer 3 Network
Step 2
From the drop-down list, choose a server and click Display. Any configured routes are displayed.
Step 3 Enter the route settings as appropriate. See Table 4-42 for descriptions of the fields.
Table 4-42 Route Table Fields
Field Description
Network IP address of the network.
Subnet Mask Subnet mask of the network.