Specifications

4-108
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Array Level Configuration
Step 2 From the Select Stream Group to View/Edit, select a Stream Group and click Display.
Step 3 Enter the Error Repair settings as appropriate. See Table 4-35 for descriptions of the fields.
Step 4 Click Submit.
To clear the fields and start over, click Reset.
To return the settings to the factory default values, click Factory.
To monitor the VOD Error Repair feature, use the Application Monitoring Tool (AMT). For more
information, see Appendix E, “Using the TV CDS Streamer Application Monitoring Tool.”
Table 4-35 VOD Error Repair Fields
Field Description
Error Repair Mode
ER Enable To enable Error Repair, check the ER Enable check box.
RTP Encapsulation Enable To enable RTP encapsulation, check the RTP Encapsulation Enable
check box. TV CDS supports both UDP and RTP encapsulation. If
the RTP Encapsulation Enable check box is not checked, the CDS is
configured to only handle UDP encapsulation.
Repair Packets DSCP
DSCP of Repair Packets Sent DSCP value for the transmitted RTP and RTCP packets sent for error
repair. The range is from 0 to 63. The default is 0.
RTCP Report Exporting
Exporting Click the Enabled radio button to enable exporting of the RTCP
reports. The RTCP reports can be exported to a third-party analysis
application.
IP Address Enter the IP address or the domain name of the server hosting the
analysis application.
TCP Ports Enter the TCP port number that is used to receive the reports on the
server hosting the analysis application.