Specifications

4-98
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Array Level Configuration
To edit a barker stream, choose the barker stream and click Next. Enter the new settings and click
Submit. To add new content, choose the number of content objects to add from the add content
drop-down list. If the barker stream is playing at the time changes are submitted, the stream will stop.
You will need to click Start Barker to restart the stream.
To delete a barker stream or view a Barker Stream settings, see the “Barker Stream Monitor” section on
page 5-31.
Configuring Playout Scheduler
The Playout Scheduler page allows you to schedule content that is streamed to a broadcast QAM. The
playout channels available are determined by the IP address and port of the broadcast QAM and are
configured in the Output Channels page. See the “Configuring Output Channels” section on page 4-39
for more information.
Note The Playout Scheduler page is part of the TV Playout feature and is displayed only if TV Playout feature
is enabled. For more information, see the “Playout Scheduler” section on page F-11.
To display information on all playout channels, as well as all Barker Streams, see the “Playout/Barker
Reports” section on page 6-41. For API information on getting the details of Barker Streams and playout
channels, see the Cisco TV CDS 2.5 API Guide.
Note You can only schedule current and future playout timeslots. Past timeslots are not displayed.
To configure a playout schedule, do the following:
Step 1 Choose Configure > Array Level > Playout Scheduler. The User Preferences for the Playout Schedule
page are displayed (Figure 4-39).