Specifications

4-96
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Array Level Configuration
Step 6 Click Submit.
To clear the fields and start over, click Reset.
Step 7 To play the barker stream, click Start Barker.
Playlists can be schedule for play by using the Playout Scheduler.
Note A content object loops the specified number of times before the barker stream continues on to
the next content. The barker stream loops indefinitely.
Tip To edit a barker stream, choose the barker stream and click Next. Enter the new settings and click
Submit. To add new content, choose the number of content objects to add from the add content
drop-down list.
If the barker stream is playing at the time changes are submitted, the stream stops. You need to
click Start Barker to restart the stream.
Tip To delete a barker stream or view a Barker Stream settings, see the “Barker Stream Monitor”
section on page 5-31.
ASI Streaming
For ASI streaming, a barker stream consists of up to 65 content objects and is associated with a service
group and program number for broadcasting.
To configure Barker Streams for ASI streaming:
Step 1 Click Configure > Array Level > Barker Stream/Playlists. The Barker Stream page is displayed
(Figure 4-33).
Note The Barker Stream page displays the delivery service mode for the Baker Stream application. To
change the delivery service mode (active-active or active-standby), see the “Configuring the TV
Playout Application” section on page 7-17.