Specifications

xvi
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Preface
Objective
This guide provides the information you need to configure and monitor the Cisco TV CDS.
This guide provides procedures for using the commands that have been created or changed for use with
the Cisco TV CDS. It does not provide detailed information about these commands.
This guide does not describe system messages you might encounter or how to install your CDS. For
information on installing the hardware, see the Cisco Content Delivery Engine 100/200/300/400
Hardware Installation Guide, the Cisco Content Delivery Engine 110 Hardware Installation Guide, or
the Cisco Content Delivery Engine 205/220/250/420 Hardware Installation Guide. See the “Related
Documentation” section on page xviii for links to documentation online.
For documentation updates, see the release notes for this release.
Document Organization
This document contains the following chapters and appendices:
Chapter or Appendix Descriptions
Chapter 1, “Product Overview” Provides an overview of the Content Delivery System.
Chapter 2, “Network Design” Describes the possible network topologies for the
Content Delivery System.
Chapter 3, “Getting Started” Describes accessing and navigating the Content Delivery
System Manager (CDSM).
Chapter 4, “Configuring the CDS” Describes how to configure the CDS using the CDSM
web-based user interface.
Chapter 5, “System Monitoring” Explains how to monitor the CDS components using the
CDSM.
Chapter 6, “System Reporting” Explains the different reports available through the
CDSM.
Chapter 7, “System Maintenance” Explains how to install software updates, restart services,
add administrator users, and shut down and reboot the
servers.
Appendix A, “Troubleshooting” Presents troubleshooting procedures for the CDS,
including the symptoms, probable causes, and
recommended actions for a variety of problems.
Appendix B, “Creating Bulk Configuration
Files”
Provides information on creating Bulk Configuration
XML files.
Appendix C, “BMS Communication” Describes the mandatory values between the business
management system (BMS) and the CDS to ensure
communication between them.
Appendix D, “SNMP MIB and Trap
Information”
Provides information on SNMP and the Cisco TV CDS
proprietary SNMP informational events and traps.