Specifications

4-86
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Array Level Configuration
Fixing Conflicts in the Media Scheduler
Conflicts can occur as a result of the following scenario:
• Information was uploaded from an EPG file and the Media Scheduler is using this information.
However, the schedule was modified.
• The schedule information is updated with new entries for the same time and channel, but each entry
has different content information.
To view these conflicts and schedule the latest information, do the following:
Step 1 Choose Configure > Array Level > Media Scheduler. The Media Scheduler page displays all the
conflicts, including those events that have passed (Figure 4-32).
To go to the main Media Scheduler page, click Go To Scheduler.
Figure 4-32 Media Scheduler Page—Conflicts
Step 2 To fix a scheduling conflict, click the link for the record number. The Media Scheduler page refreshes
and displays the channel of the selected conflict.
The timeslots that have conflicts are displayed with a brown color.
Step 3 To clear a conflict, click the timeslot. The timeslot gets the latest information and is displayed with the
color green, indicating “Marked for Scheduling” if all the metadata information is available.
If all the required information for metadata creation is not available, a new window opens and the
Package Metadata Editor is displayed (Figure 4-30). Fill in the metadata as required and click Submit.
The Package Metadata Editor window closes.
Step 4 After all the conflicts have been cleared on the Media Scheduler page, click Submit to schedule all
“Marked for Scheduling” timeslots.