Specifications

4-79
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Array Level Configuration
Configuring the Media Scheduler
Note The Media Scheduler page is part of the licensed MediaX feature. For more information see the “Media
Scheduler” section on page F-10.
The Media Scheduler page allows you to schedule content for ingest and generate content metadata. The
channels available in the Media Scheduler page are determined by the channels included in the uploaded
EPG file and those configured on the Input Channels page. See the “Uploading an EPG File” section on
page 7-20 and the “Configuring Input Channels” section on page 4-37 for more information.
The ingest time is calculated by adding the value of the ingest schedule start timeslot to the Publish Time
Adjustment field from the Input Channels page.
Note To be able to schedule content, you must add the channels through the Input Channel page, and then
either upload an EPG file to populate the cells in the Media Scheduler, or manually enter the metadata
using the Media Scheduler Package Metadata window.
From the Media Scheduler page, you can perform the following tasks:
• Choose the channels to schedule content ingest.
• View the content metadata for each selected timeslot.
• Schedule content to be ingested for a particular channel, provided all required ADI metadata values
are available.
• Add metadata values if they are not available, or modify the metadata values.
• Resolve any conflicts in the EPG data.
The following procedure walks you through all these tasks.