Specifications

4-73
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Array Level Configuration
Each VHO must have at least one Stream Group assigned to it and must have one Stream Group
configured as the Setup IP or the Control/Setup IP. The other Stream Groups in the VHO must be
configured as a Control IP.
Step 3 For each Stream Group, enter the IP address and subnet mask of the Control IP, Setup IP, or
Control/Setup IP.
Step 4 From the IP Type drop-down list, choose an IP type. See Table 4-26 for descriptions of the types.
Note There can only be one Setup IP or Control/Setup IP address among all the Stream Groups.
Step 5 Click Submit.
To reset the field, click Reset.
Note All currently configured Control/Setup IPs are listed in the Configured Control/Setup IPs section
of the Control/Setup IP page.
To edit a Control/Setup IP, make any changes to the Control/Setup IP as necessary and click Submit.
To delete a Control/Setup IP, check the Delete check box and click Submit.
Configuring Sites
The Site Setup page allows you to create sites and assign Stream Groups, Cache Groups, and Vault
Groups to them for configuring thin pipe maps. To configure thin pipe maps, you must first configure
the sites.
To configure a site, do the following:
Step 1 Choose Configure > Array Level > Site Setup. The Site Setup page is displayed.
Step 2 From the Select Site to View/Edit drop-down list, choose Add New Site and click Display.
To edit a site, choose the site from the drop-down list and click Display.
Step 3 In the New Site Name field, enter the name of the site and click Submit.
Table 4-26 Control/Setup Types
Type Description
Control IP IP address used only for LSCP client or RTSP client control.
Setup IP Setup IP address is the same as the Stream Master IP. Any change to the Setup
IP is reflected in the Stream Master IP field on the Streamer ISA page. See the
“Configuring the Streamer for BMS Connectivity” section on page 4-45 for
information about the Stream Master IP.
Control/Setup IP Control/Setup IP address used for LSCP client control and as the Master Stream
Service. Only one IP address can be designated as the Setup IP.