Specifications

4-68
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Array Level Configuration
Mapping Stream Groups to Cache-Fill Sources
The Stream To Cache Map page is used to map Cache Groups, Vault Groups, and other Stream Groups
as cache-fill sources for each Stream Group in a VVI. Before you can map the different groups to Stream
Groups, you must create them. See the “Configuring Stream Groups” section on page 4-58, the
“Configuring Vault Groups” section on page 4-61, and the “Configuring Cache Groups” section on
page 4-65 for more information.
Note The Stream To Cache Map page is available only on the Stream Manager when VVI is enabled. For more
information, see the “Virtual Video Infrastructure” section on page F-7.
Streamers can be used as cache-fill sources when Streamer is Cache is enabled on the Server Setup page
(“Configuring the Servers,” page 4-112). A Stream Group is available on the Stream To Cache Map page
when at least one Streamer in a Stream Group has Streamer is Cache enabled.
Vaults can be used as cache-fill sources when Vault Groups is enabled. For more information, see the
“Bulk Configuration” section on page F-5.
To map cache-fill sources to Stream Groups, do the following:
Step 1 Choose Configure > Array Level > Stream To Cache Map. The Stream To Cache Map page is
displayed (Figure 4-22).
Figure 4-22 Stream To Cache Map Page
Note The Import Groups button is not supported in Release 2.5.1.
Step 2 From the Stream Group drop-down list, choose a Stream Group and click Select. All available Cache
Groups, Stream Groups, and Vault Groups are displayed. By default, all preferences are set to None.