Specifications

4-63
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Array Level Configuration
Step 6 Click Submit.
To reset the field, click Reset.
To view the members of a Vault Group, choose the Vault Group from the drop-down list and click
Display.
To delete a Vault Group, remove all Vaults from the group, then click Delete Group.
Configuring Ingest Steering
The Ingest Steering page allows you to have specific Vault Groups ingest content with specified product
IDs. For example, if you have a local Vault Group that you want to be responsible for ingesting all the
local live ingests for that area, you can use the product ID in the content name to direct that content to
the local Vault Group.
For more information, see the “Steering Ingests” section on page 2-18.
Note The Ingest Steering page is not available if the Ingest Steering feature is not enabled. For more
information, see the “Ingest Steering” section on page F-12. The Ingest Steering feature requires both
central-management VVI and Vault Groups be enabled.
To configure Ingest Steering, do the following:
Step 1 Choose Configure > Array Level > Ingest Steering. The Ingest Steering page is displayed
(Figure 4-20).
Note The content name must be in the following format:
ProviderId::AssetId::contentName. The ProviderId is used to map the ingest policy.