Specifications

4-62
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Array Level Configuration
Figure 4-19 Vault Groups Setup Page
Step 2
From the Select Vault Group to View/Edit drop-down list, choose Add New Vault Group and click
Display.
To edit a Vault Group, choose the Vault Group from the drop-down list and click Display.
Step 3 In the New Vault Group Name field, enter the name of the Vault Group and click Submit.
You can use only alphanumeric characters (0–9, a–z, A–Z), the dash (-), and the underscore (_) to create
a Vault Group name.
Step 4 If Ingest Steering, VVI, and Vault Groups are enabled, for the Vault Group Location choose either
National or Local.
Note For information on enabling Ingest Steering, see the “Ingest Steering” section on page F-12. For
information on Ingest Steering, see the “Steering Ingests” section on page 2-18.
Step 5 Add the Vaults to the Vault Group.
The unassigned Vaults are listed along with a drop down-list for each that offers the options described
in Table 4-24.
Table 4-24 Vault Options
Vault Option Description
No Change Do not make any changes to the Vault Group assignment.
Vault Group Name Add this Vault to this Vault Group.
None Remove this Vault from this Vault Group. Applicable only to
Vaults assigned to the selected Vault Group.
Don’t Change Do not assign this Vault to this Vault Group.