Specifications

4-60
Cisco TV CDS 2.5 ISA Software Configuration Guide
OL-24788-01
Chapter 4 Configuring the CDS
Array Level Configuration
To configure a Stream Group, do the following:
Step 1 Choose Configure > Array Level > Stream Groups Setup. The Stream Groups page is displayed
(Figure 4-18).
Figure 4-18 Stream Groups Page
Step 2
From the Select Stream Group to View/Edit drop-down list, choose Add New Stream Group and click
Display.
To edit a Stream Group, choose the Stream Group from the drop-down list and click Display.
Step 3 In the New Stream Group Name field, enter the name of the Stream Group and click Submit.
You can use only alphanumeric characters (0–9, a–z, A–Z), the dash (-), and the underscore (_) to create
a Stream Group name.
Step 4 Add the Streamers to the Stream Group.
The unassigned Streamers are listed along with a drop down-list for each that offers the options
described in Table 4-23.
Step 5 Click Submit.
To reset the field, click Reset.
Table 4-23 Streamer Options
Streamer Option Description
No Change Do not make any changes to the Stream Group assignment.
Stream Group Name Add this Streamer to this Stream Group.
None Remove this Streamer from this Stream Group. Applicable only
to Streamers assigned to the selected Stream Group.
don’t change Do not assign this Streamer to this Stream Group.